small surface mount ultra fast diodes voltage range: 100 - 600v es1001fl - es1006fl es1006fl es1004fl es1003fl ES1002FL es1001fl : sod-123fl current: 1.0 a plastic body over passivated junction method 2026 : color band denotes cathode end : any :0.0007 ounce, 0.02 grams glass passivated device ideal for surface mouted applications metallurgically bonded construction high temperature soldering guaranteed: 250 c/10 seconds,0.375 ? (9.5mm) lead length, 5 lbs. (2.3kg) tension low reverse leakage case terminals polarity mounting position weight : plated axial leads, solderable per mil-std-750, features mechanical data ! ! ! ! ! ! ! ! ! ! ! maximum ratings and electrical characteristics t a = 25 c unless otherwise specified single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. 100 70 100 400 280 400 600 420 600 volts volts volts amp amps volts v rrm v rms v dc i (av) i fsm v f 1.0 25.0 1.25 maximum repetitive peak reverse voltage maximum rms voltage maximum dc blocking voltage maximum average forward rectified current peak forward surge current 8.3ms single half sine-wave superimposed on rated load (jedec method) maximum instantaneous forward voltage at1.0a maximum dc reverse current t a =25 c at rated dc blocking voltage t a =100 c i r 5.0 100.0 a m maximum reverse recovery time (note 1) typical junction capacitance (note 2) c j pf operating junction and storage temperature range r q ja t j , t stg 85 10 -55 to +150 c typical thermal resistance (note 3) k/w 35 ns trr 200 140 200 300 210 300 0.95 1.7 note: 2.measured at 1mhz and applied reverse voltage of 4.0v d.c. 1.measured with if=0.5a, ir=1a, irr=0.25a. 3.pcb mounted on 0.2*0.2" (5.0*5.0mm) coppeer pad area. characteristic 1 of 2 symbol unit 3.58 3.72 0.55 0.57 0.53 0.15 0.17 0.13 e d 1.00 1.03 0.097 1.05 1.08 1.02 1 1.80 1.83 1.77 2.75 2.78 2.72 a 3.65 3 sod-123fl dim min max typ b c h l all dimensions in mm a e l b c e h d www.sunmate.tw
2 of 2 ratings and characteristic curves es1001fl thru es1006fl 1.0 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 175 0.01 0.1 1 10 100 100 10 1 0.1 reverse voltage,volts t,pulse duration,sec. fig. 5-typical junction capacitance fig. 6-typical transient thermal impedance fig. 2-maximum non-repetitive peak forward surge current fig. 1- forward current derating curve average forward rectified current, amperes junction capacitance, pf peak forward surge current, amperes single phase half wave 60hz resistive or inductive load 0 20 40 60 80 100 1,000 100 10 1 0.1 0.01 tj=100 c tj=25 c percent of peak reverse voltage,% fig. 4-typical reverse characteristics instantaneous reverse current, microamperes transient thermal impedance, c/w ambient temperature, c fig. 3-typical instantaneous forward characteristics instantaneous forward current,amperes instantaneous forward voltage, volts 0 0.4 0.8 1.2 1.6 1.8 0.01 0.1 1 20 10 t j =25 c pulse width=300 m s 1%duty cycle es1001fl-ES1002FL es1003fl-es1004fl es1006fl 30 25 20 15 10 5.0 0 number of cycles at 60 hz 1 10 100 8.3ms single half sine-wave (jedec method) www.sunmate.tw
|
